One of Note 5/5
One of Note 5/5
Construction D'un Puits Forage creusé
La réalisation d’un forage comprend plusieurs étapes techniques importantes pour garantir l’efficacité et la qualité de l’ouvrage. Voici une description détaillée des 3 étapes principales :
- Choix de l’interface et technique de forage : Il est essentiel de sélectionner la meilleure interface entre la nappe d’eau et la pompe en fonction des caractéristiques du terrain. Les terrains hétérogènes nécessitent des techniques de forage spécifiques. Par exemple, le forage destructif ou en marteau fond de trou est efficace sur des terrains homogènes. Ce système utilise un marteau pneumatique à haute pression pour évacuer les sédiments à la surface et permet de vérifier les arrivées d’eau au fur et à mesure de l’avancement.
- Mise en place du tubage : Cette opération consiste à installer un tubage de « coffrage » pour maintenir les terrains de surface instables. Le tubage peut être en acier ou en PVC en fonction des caractéristiques du sol. Il doit être d’un diamètre adéquat pour permettre la poursuite de la foration.
- Cimentation annulaire : Pour rendre étanche le tubage, une injection de ciment fin est effectuée. Cela vise à prévenir les infiltrations d’eau de surface dans l’ouvrage pour éviter toute pollution des eaux profondes. En l’absence de cimentation, un parapluie de cimentation est réalisé sur le tubage final suivi de l’injection de billes d’argile.
- Continuation du forage : La foration se poursuit à l’aide d’un marteau fond de trou pour atteindre la zone aquifère. L’outil est actionné par de l’air comprimé à haute pression pour remonter les cuttings et l’eau des zones aquifères. Avant de remonter l’outil, une analyse des cuttings et un test du débit sont effectués.
- Installation de la crépine : Le tubage, en PVC ou en acier, doit être équipé d’une crépine pour permettre à l’eau de pénétrer et d’être captée par la pompe.
- Mise en place du massif filtrant : Si l’eau est chargée de sédiments, un massif filtrant composé de raviers calibrés est installé pour filtrer l’eau. Un regard est temporairement mis en place pour protéger le forage.
- Nettoyage de l’ouvrage : Une fois la foration terminée, un nettoyage minutieux est réalisé à l’aide de la méthode de l’air lift, qui consiste en l’injection d’air à gros débit et en grande pression pour assurer un forage propre et prêt à être utilisé.
- Choix et installation de la pompe : Après le nettoyage, l’étape suivante consiste à choisir la pompe adaptée aux besoins spécifiques en eau. La pompe peut être manuelle ou motorisée, selon les caractéristiques du forage et l’utilisation prévue. Elle est installée au fond du forage et reliée à la crépine pour extraire l’eau.
- Test de la pompe et ajustements : Une fois la pompe installée, un test de fonctionnement est effectué pour vérifier son bon fonctionnement. Des ajustements peuvent être nécessaires pour obtenir le débit d’eau optimal.
- Aménagement de la surface : Lorsque le forage est fonctionnel, une attention particulière est portée à l’aménagement de la surface autour du puits. Cela peut inclure la construction d’une margelle ou d’un dispositif de protection pour empêcher les contaminants de pénétrer dans le forage.
- Protection du forage : Pour protéger le forage des contaminants extérieurs, une couverture ou un dispositif de protection est installé au-dessus du puits. Cela peut être une structure en béton ou une couverture spécifique pour empêcher toute contamination de la source d’eau.
- Tests de qualité de l’eau : Des tests de qualité de l’eau sont effectués pour s’assurer de sa potabilité et de sa conformité aux normes de santé et de sécurité. Ces tests peuvent être réalisés en laboratoire pour vérifier la présence de contaminants potentiels.
- Entretien et maintenance : Une fois le forage opérationnel, un plan d’entretien et de maintenance régulière est établi pour assurer le bon fonctionnement continu de l’équipement de pompage et pour garantir la qualité de l’eau extraite.
Ces étapes complètent le processus de construction d’un forage en assurant que l’équipement est opérationnel, que l’eau est accessible et de qualité, et que des mesures de protection sont en place pour préserver la source d’eau.
Well with storage tank
Features :
- Drilling
- Water or electric pump (powered by a suitable energy source)
- 5 taps
Number of beneficiaries :
Up to 500 beneficiaries
Construction time :
Built in 20 days
Est-ce que faire construire un puits compte comme une sadqa jariya ?
Oui, faire construire un puits est considéré comme une sadqa jariya. Selon un hadith rapporté par Muslim, le Prophète Muhammad (paix et bénédictions sur lui) a dit :
« Lorsque le fils d’Adam meurt, ses actions s’arrêtent, sauf pour trois choses : une charité continue (sadqa jariya), une connaissance bénéfique, ou un enfant pieux qui prie pour lui. »
Construire un puits entre dans la catégorie de la charité continue, car il fournit une source d’eau durable et bénéfique pour les gens. Les enseignements islamiques mettent en avant l’importance de telles œuvres caritatives qui continuent de bénéficier à la communauté même après la mort du donateur.
Construire un Puits en 3 étapes avec Well Solidarity
1
Select the type of well you would like to have built, then select the country of your choice and don't forget to leave a short message.
2
Le travail de Well Solidarity consistera à gérer les commandes (type de puits et localisation, impression de panneaux personnalisés) nous devons également effectuer des recherches sur le site, vérifier la qualité des matériaux et superviser le projet pendant la construction.
3
Our installation team will oversee the construction of the site, documenting every step along the way. Once the work is complete, our on-site team will take photos and videos.
Frequently asked questions
The lifespan of a well depends on the depth of the water and regular maintenance by the community. Proper use of equipment such as pumps is essential to prolong its life. Collective responsibility for maintenance ensures that the well remains a reliable source of water for the community.
Yes, you can extend the life of a well with regular maintenance.
The construction of a well varies according to a number of parameters, including the local geology and the depth to be reached. In general, our team aims to complete a well within 5 days to meet the community's water needs.
Thanks to our experience and expertise, and the mobilisation of resources, we are able to build wells efficiently.
The cost of building a well varies according to various factors such as depth, soil type and geographical location.
Each financial contribution is dedicated exclusively to the construction of the wells. We ensure total transparency by providing regular updates and detailed photos at every stage of the well's construction.
Yes, each well is personalised with the first and last names of the donors as well as a personal message or an extract from the Koran or a hadith to support the local population.
Yes, you have the option of inscribing several first and last names on the commemorative plaque, subject to the constraints of limited space on the plaque.
Well Solidarity carries out projects in various countries. We concentrate our efforts in regions where access to drinking water is limited, particularly in Africa and Asia.
Wells in Nepal, India and Pakistan may cost less due to geographical factors, local conditions and soil characteristics. For example, in Asia, certain regions have favourable geological and climatic conditions, facilitating access to the water table by simpler means of construction such as manual sunken wells, whereas in Africa, the nature of the soil and the depth of the water table may require more expensive and complex drilling. These geographical differences partly explain the variations in costs between regions.
To support the construction of a well, a donor can contact Well Solidarity to make a financial donation. Once the well is built, the company provides updates and photos to show the impact of the donation. Donors can be recognised and informed of the progress of the project as a sign of gratitude for their contribution.
You can support Well Solidarity's projects in a variety of ways, including direct donations, social networks and other means of contact.
In Pakistan, sinking a pipe into the ground is the preferred method because of the geological conditions and the ease of access to the water table in certain regions, making it possible to build hand-dug wells.
Well Solidarity is a company focusing on humanitarian projects, including the construction of wells in disadvantaged regions to ensure access to drinking water.